Mushroom Sterilizer

Replacement PID Probe

The replacement PID probe inserts into your mushroom steamer and connects to the controller via the PID cable.

This is a great item to have as a spare.

$60.00

Replacement PID Cable

The replacement PID cable is for the connection between the controller on your mushroom steamer and the probe.

This is a great item to have as a spare.

$25.00

220/120 Crossover Cable

For situations where 220v power is unavailable, you can use this 120v crossover cable with the controller on your substrate steamer.

Keep in mind that we strongly recommend running substrate steamers on 220v whenever possible.

Modifying this cable or using it for anything other than its intended purpose will lead to an unsafe situation. At the very least, it will burn out the relays in your controller.

$50.00

Mushroom Substrate Steamer Spares Kit

Highly recommended for our international customers, or anyone who prefers to keep extra parts and pieces on hand, the Mushroom Substrate Steamer Spares Kit includes the following:

$120.00

Dual Element Temperature Controller

The add-on dual element PID controller Includes a variety of hardware for easy wall attachment. It is provided with a cable leads, but it will need to be wired to your heaters. The included temp probe can be screwed into 1/2" NPT threaded bung.
 
The controller allows you to set the target temp and run time. It features a stainless steel enclosure, indicator lights, safety lockout, and temperature probe.
$940.00

30 Gallon Steam Generator

30 Gallon Steam Generator Kit

The 30 gallon steam generator kit is not designed for pressure. It is imperative that the output be open to atmosphere.

The kit is not complete. At a minimum, you will need piping for the steam output, ¾”pressure relief valve or valves, ½” Npt pressure gauge, and a heater or heaters.  If you are unsure on the number of heaters, we recommend getting an extra heater port for possible expansion.

Steamer includes:

$1,295.00

10 PSI Pressure Regulator

Water Pressure Regulator, replacement item for substrate steamers. Connects directly to water source.

$19.91

150 Gallon Mushroom Substrate Steamer

Based on a design by Myers Mushrooms, our substrate steamer is the easiest, most cost-effective solution on the market.

A typical cycle will take 14-24 hours. Time is dependent on ambient temperature, substrate temperature, and heater wattage.  The 150 gallon model will accommodate almost 600 lbs of substrate. The 150 gallon drums is 51" tall. The larger drum increases capacity but it can be more difficult to load and unload.

$4,095.00

Substrate Temperature Controller

The add-on PID controller Includes a variety of hardware for easy wall attachment. It is provided with a cable lead, but it will need to be wired to your exisitng heater.
$565.00

130 Gallon Mushroom Substrate Steamer

Based on a design by Myers Mushrooms, our substrate steamer is the easiest, most cost-effective solution on the market.

A typical cycle will take 14-24 hours. Time is dependent on ambient temperature, substrate temperature, and heater wattage.  The 130 gallon model will accommodate 500 lbs of substrate.

$3,595.00
Syndicate content